[KNB1] Board Revision Level

[Bob Molloy]

I just want to confirm something. The instructions refer to board revision C. Myboard is Rev. Cr. That's not same as C, right?

Thanks.

73,
Bob KD2UJ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Mike Morrow-3]

Bob wrote:

> I just want to confirm something. The instructions refer to board
> revision C. Myboard is Rev. Cr. That's not same as C, right?

I don't believe there has been any revision to the PCB for the KNB1
in more than eleven years, and only one revision to the Errata sheet.

Even though the KNB1 manual mentions a revision D PCB, that has never
been issued.  The manual also states that on the revision C PCB, the
model number is mis-written as KBN1 instead of KNB1, so that's a way
to verify rev. C.

It's pretty safe to say your PCB is a revision C PCB.  Don't forget
to add the capacitor shown in the errata...it's pretty important.

73,
Mike / KK5F
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html