KPA-100 and PTT for FL-2100Z

[DaveVK]

Hi,

Is the switching transistor on the KPA-100 suitable for the FL-2100Z? Or should I setup a relay buffer device?

Regards,

Dave

[Lars Midtboe]

Hi Dave
for your info my k3 is direct connected to my kenwood tl-922 amp.not shure how the fl is working, but im building tonight an buffer  (optcopler) to protect my beloved K3.

73 de LA2RRA Lars M

DaveVK wrote

Hi,

Is the switching transistor on the KPA-100 suitable for the FL-2100Z? Or should I setup a relay buffer device?

Regards,

Dave

[.hank.]

I forget what the voltage on the relay jack of the FL-2100, but the K2/100 will not key it.  
You need either a relay buffer or an Ameritron ARB-704.
73    Hank    K8DD

DaveVK wrote

Hi,

Is the switching transistor on the KPA-100 suitable for the FL-2100Z? Or should I setup a relay buffer device?

Regards,

Dave

[DaveVK]

Thanks everyone for the advice.  Appreciated.

Regards,

Dave

.k8dd. wrote

I forget what the voltage on the relay jack of the FL-2100, but the K2/100 will not key it.  
You need either a relay buffer or an Ameritron ARB-704.
73    Hank    K8DD

DaveVK wrote

Hi,

Is the switching transistor on the KPA-100 suitable for the FL-2100Z? Or should I setup a relay buffer device?

Regards,

Dave