Would a CI-V cable work for you? I personally tested IC7600 and 7300 and I’ve been told that 7610 also works. The amp looks for the TX frequency message from the exciter. I’m not sure whether a 765 pro 2 sends that. If it doesn’t, I can teach KPA1500 firmware to look for the frequency message the 765 sends as you move the VFO, if I can figure out what that is. We want the TX VFO freq to deal with split and XIT. I’m away from my notes, but I think the CI-V message might be 1C with a sub code 3 for tx freq.
If you connect the radio to amp via CI-V, check the XCVR FREQ status page, that comes from the CI-V message. Also choose Icom on the RADIO TYPE menu. There’s is a speed to match up and the radio needs to know to send TX freq messages on QSY, that’s called transceive in some icom documents.
73 de Dick, K6KR
Sent from my iPhone
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
