Thank you to Cody and Michelle for great support with a fault in the
KPA-1500 low pass filter board. Cody quickly diagnosed the problem and
Michelle expedited shipment to me. It's now up and running again.
It's the small things that impress - like including extra screws for the
LPF board mounting and the bottom of the cabinet, plus extra zip-ties,
just in case.
Only one quibble with the instructions - it is almost impossible to get
the old LPF board out with the TX sampling BNC connector in place.
Temporarily removing it made all the difference.
--
73, Pete N4ZR
Check out the Reverse Beacon Network
at <
http://reversebeacon.net>, now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
