KPA #455 not very well

[DK2GZ]

Hello
 
this was exact my problem with #400
 
The problem was the 10pin ribbon cable to the I/O board. It was attached in
 
the wrong direction on the power supply board and then therefore also   on
the I/O board, because the plugs are coded. I did reset the ribbon cable  
in  
the right way and all problems now solved. Bandswitching is also  working  
perfectly.


73 de Harry,  DK2GZ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html