KPA 500 Fan Continues to Run

His fan runs when the amp is off and the fan turns off when the amp is on
and on standby.

John KK9A


From: Don Wilhelm
Mon May 8 08:42:54 EDT 2017

Bill,

Check the menu setting for FAN CTL - any setting other than NOR will
cause the fan to run continuously.
If it runs all the time when set to NOR, contact support.

73,
Don W3FPR

On 5/8/2017 8:30 AM, Bill Gaines wrote:
> With the amp and rig turned off the fan in the KPA500 continues to run.
Not just the short interval I was used to it running, but for days it
will run.


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]