I currently use a KRC2 for band decoding with a cable from the K3 ACC
connector simply passing AUXBUS to the KRC2. I just spotted Eric's response on AUXBUS 'missing' from the the KPA-500 / K3 cable layout in the KPA-500 manual. But why would the band info be needed if AUXBUS is available? How would a K3 / KPA-500 / KPC2 be connected? K3 AUX ACC Connector Pin 2 (AUXBUS) –> KRC2 J2-Pin 6 and KRC2 J1-Pin 6 –> KPA500 AUX Pin 2 ?? (I do not use any other KPC2 J1/J2 data lines) 73, Bill N2BC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
The KRC2 and KPA500 do a great job of sharing the Auxbus with the K3.
You will need a cable that breaks out a connection going to both devices from the K3. The KPA500's Auxbus implementation is transmit only, so it does not receive band information from the K3 but only talks to it as well defined times. This also makes it incompatible with the K2 Auxbus. It co-exists with the KRC2 quite well, so once you have the needed interconnect cable, everything should be very happy, with the KPA amplifying on the correct band, and the KRC2 selecting the desired antenna. The cable is pretty simple. IOn the K3 side, pin 2 connects to the KPA connector's pin 2, and also to the appropriate pin (6 if I remember correctly) on the KRC2's DE9. Also needed is ground, pin 5 on the K3 to pin 5 (again, my memory is foggy on the exact pin number) on the KRC2. If you need help with this, just ask! Jack Brindle, W6FB On Apr 6, 2011, at 12:34 PM, Bill Coleman wrote: > I currently use a KRC2 for band decoding with a cable from the K3 ACC > connector simply passing AUXBUS to the KRC2. > > I just spotted Eric's response on AUXBUS 'missing' from the the > KPA-500 / K3 > cable layout in the KPA-500 manual. But why would the band info be > needed > if AUXBUS is available? > > How would a K3 / KPA-500 / KPC2 be connected? > > K3 AUX ACC Connector Pin 2 (AUXBUS) –> KRC2 J2-Pin 6 and KRC2 > J1-Pin > 6 –> KPA500 AUX Pin 2 ?? (I do not use any other KPC2 J1/J2 data > lines) > > 73, Bill N2BC > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Administrator
|
In reply to this post by Bill N2BC
New manual uploaded. The Auxbus is now shown properly on the cable.
Eric On 4/6/2011 12:34 PM, Bill Coleman wrote: > I currently use a KRC2 for band decoding with a cable from the K3 ACC > connector simply passing AUXBUS to the KRC2. > > I just spotted Eric's response on AUXBUS 'missing' from the the KPA-500 / K3 > cable layout in the KPA-500 manual. But why would the band info be needed > if AUXBUS is available? > > How would a K3 / KPA-500 / KPC2 be connected? > > K3 AUX ACC Connector Pin 2 (AUXBUS) –> KRC2 J2-Pin 6 and KRC2 J1-Pin > 6 –> KPA500 AUX Pin 2 ?? (I do not use any other KPC2 J1/J2 data lines) > > 73, Bill N2BC > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Free forum by Nabble | Edit this page |