KPA100/Kat100

[KR4OW]

I picked up  KPA100/KAT100 in an EC2 case how do I want to divorce them
to install the KPA100 into the K2 to make it a K2-100 and leave the KAT100 alone tuner only. Has anyone on the reflector done this yet? I thought I would ask before tearing into it.
David KR4OW


     
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-4]

David,

If you want to do it without purchasing any new parts, just remove the
KPA100 from the EC2 enclosure and mount it on top of the K2.  Use the
top cover from the K2 to fill the big hole in th etop of the EC2
enclosure with the KAT100 still inside.

OTOH, if you require the short height KAT100, you will have to obtain
the KAT100-1 enclosure hardware.  It is not a difficult task at all.

73,
Don W3FPR

David N. wrote:
> I picked up  KPA100/KAT100 in an EC2 case how do I want to divorce them
> to install the KPA100 into the K2 to make it a K2-100 and leave the KAT100 alone tuner only. Has anyone on the reflector done this yet? I thought I would ask before tearing into it.
> David KR4OW
>  
>
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com