KPA100 Rev D-4

[Soaring Eagles]

I'm just starting my KPA100. R28 is supposed to be a 200 ohm 1W resistor,
but the errata states that if the resistor doesn't have color codes (mine
doesn't) then the markings would be 102J. However, I'm thinking that a 200
ohm resistor would be marked 201J (of which I have 2 and my inventory came
out right). Just want to confirm that this is the correct resistor.

Thanks for the help.

Jim, WD9HBC
K2 #5757
KX1 #1517

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

Jim,

You are correct, 200 ohms will be marked '201'

73,
Don W3FPR

> -----Original Message-----
>
> I'm just starting my KPA100. R28 is supposed to be a 200 ohm 1W resistor,
> but the errata states that if the resistor doesn't have color codes (mine
> doesn't) then the markings would be 102J. However, I'm thinking
> that a 200
> ohm resistor would be marked 201J (of which I have 2 and my
> inventory came
> out right). Just want to confirm that this is the correct resistor.
>
> Thanks for the help.
>
> Jim, WD9HBC
> K2 #5757
> KX1 #1517
>

--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.17.31/676 - Release Date: 2/8/2007
3:04 PM

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com