Greetings Elecrafters,
K2 #5945 with KPA100 has been very happy lately, working lots of good
DX on the bands and teaching it's owner some new tricks :)
Anyhow, when I first finished the KPA100 a month or two ago, I noticed
some high output (like 140W) at times. It happens on 40M (well, that's
the band I'm on usually), and I'll see my wattmeter all of a sudden
start reading up around 140W. Bringing the power level doesn't have an
effect until the rig *thinks* it's down quite a bit lower, like 80W or
70W, then it seems to correct itself and it's fine from there on out,
with max power right around 100W for full-scale power settings.
Originally, we thought it might be due to an oscillation, and I have
replaced C31 (I think thats the one, I forget) with the new value to
stop the oscillations, but I seem to remember Don saying that when
there's an oscillation, the perceived SWR rises, and I don't think
that's happening.
So I'm wondering, perhaps I have a bug in the power sense section?
Maybe a bad solder joint or something?
The problem occurred numerous times the first weekend I had the KPA100
on the air, and hasn't happened since, until today. I was all excited
that the problem had gone away, but I seem to have jinxed myself :)
Any ideas, thoughts, or otherwise?
Thanks,
Jeff N6GQ
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
