KPA100 in EC2 for K3?

[Darwin, Keith]

I know the KPA100 can be put in an EC2 enclosure to make a stand-alone
linear for the K2.  Could that same stand-alone unit be used with the
K3/10 to get 100 watts?
 
Or could the KPA3 be  put in an external case and used with a K2?
 
- Keith N1AS -
- K2 5411.ssb.100 -
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[dj7mgq]

Hi Keith,

> I know the KPA100 can be put in an EC2 enclosure to make a stand-alone
> linear for the K2.  Could that same stand-alone unit be used with the
> K3/10 to get 100 watts?

This has been discussed before - check the archives - and the answer was afaik no.

> Or could the KPA3 be  put in an external case and used with a K2?

I highly doubt it.


vy 73 de toby
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Greg - AB7R]

Toby is correct.  The KPA100 is not compatible with the K3.  And the KPA3 is
strictly an internal component of the K3.

-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065

On Thu Sep 27 10:32 , [hidden email] sent:

>Hi Keith,
>
>> I know the KPA100 can be put in an EC2 enclosure to make a stand-alone
>> linear for the K2.  Could that same stand-alone unit be used with the
>> K3/10 to get 100 watts?
>
>This has been discussed before - check the archives - and the answer was afaik no.
>
>> Or could the KPA3 be  put in an external case and used with a K2?
>
>I highly doubt it.
>
>
>vy 73 de toby
>_______________________________________________
>Elecraft mailing list
>Post to: [hidden email]
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft   
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Darwin, Keith]

Thanks much guys!

- Keith N1AS -
- K2 5411.ssb.100 -

-----Original Message-----
From: [hidden email] [mailto:[hidden email]]
Sent: Thursday, September 27, 2007 10:36 AM
To: [hidden email]; Darwin, Keith;
[hidden email]
Cc: [hidden email]
Subject: Re: [Elecraft] KPA100 in EC2 for K3?

Toby is correct.  The KPA100 is not compatible with the K3.  And the
KPA3 is

strictly an internal component of the K3.

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com