KPA100 to Computer problem

[Julius Fazekas n2wn]

Hello,

I've a minor problem with K2 #4455 and KPA100 talking
to my computer (N1MM). I'm using a known good cable
between the rig and the computer, alas N1MM does not
"see" the radio. It was an older KPA, but updated with
the 1.10 chip (rev C).

Any thoughts?

Cheers,
Julius
n2wn
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Vic K2VCO]

J F wrote:

> I've a minor problem with K2 #4455 and KPA100 talking
> to my computer (N1MM). I'm using a known good cable
> between the rig and the computer, alas N1MM does not
> "see" the radio. It was an older KPA, but updated with
> the 1.10 chip (rev C).

Hi Julius,

1) The cable, of course, is a cable made according to the specs in the
KPA100 manual and not a standard RS232, cable, right?

2) PORT needs to be ON in the menu.

3) Have you tried talking to the K2 using a terminal program on the
computer?
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com