Hi Dick,
I would be interested in participating. Using a Flex 6700 via the KXUSB
cable from amp direct to USB port on radio. Set up to track the TX slice on
radio. Been working fine. Flex has a setting to auto poll.
I also have written a flow for Node Red to monitor and control the amp via a
web browser. Using the Ethernet IP connection and sending the ^ commands for
control and monitoring/info. Node Red runs on a Raspberry Pi on the network.
I will reply to you via direct email with my direct contact info.
73
Dave wo2x
-----Original Message-----
From:
[hidden email] <
[hidden email]> On
Behalf Of Dick Dievendorff
Sent: Monday, July 27, 2020 7:05 PM
To:
[hidden email]
Subject: [Elecraft] KPA1500 Alpha testers sought: Kenwood, Flex, Yaesu
exciters
I've made some recent changes to KPA1500 processing of transceiver frequency
messages from Kenwood, Flex, and Yaesu radios. Icom CI-V is unchanged.
If you use one of these radios and use the KPA1500's XCVR SERIAL connection
to communicate the transceiver's frequency to the KPA1500, I'd appreciate
your help in testing a new version. If you generally use a logging program
to poll the radio and the KPA1500 is set up to observe the commands and
responses, that helps, too.
Thanks!
73 de Dick, K6KR
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html Message
delivered to
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
