Never mind. While the reboot of macOS did nothing, cycling the amp off then on seems to have gotten by the verification hang. Firmware installed successfully.
73/Gary W2CS
> Begin forwarded message:
>
> From: Gary J Ferdinand <
[hidden email]>
> Subject: [Elecraft] KPA1500 F/W 2.17 Install Hang
> Date: April 3, 2019 at 3:40:29 PM EDT
> To: elecraft <
[hidden email]>
>
> Not my first rodeo, but I must have fouled something up. I have the 2.17 folder (containing the .hex and .rtf files) in the local folder for the KPA1500 utility. The utility says it can talk to the amp. I tell it to download the files. I get the usual firmware download window, but it hangs on the “Verifying file “kpa1500fw217.hex” message. The hang has lasted over 20 minutes now before I did a Force Quit.
>
> Suggestions?
>
> 73/Gary W2CS
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
