KPA1500 Low Gain / Attenuator

My kPA1500 is showing this msg: ATTENUATE REASON NONE.  When keyed, the
amp displays LOW GAIN RATIO 1.  Is there a way to reset the amp to full
power?

73, George K5KG


--
George Wagner, K5KG
Sarasota, FL
[hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bill K9YEQ]

George,  I didn't see a response.  I would reload your back up firmware.   If you didn't backup, then reload from website for the latest.

Bill
920-421-1172

________________________________
From: [hidden email] <[hidden email]> on behalf of George I. Wagner <[hidden email]>
Sent: Sunday, November 17, 2019 4:52:42 PM
To: [hidden email] <[hidden email]>
Subject: [Elecraft] KPA1500 Low Gain / Attenuator

My kPA1500 is showing this msg: ATTENUATE REASON NONE.  When keyed, the
amp displays LOW GAIN RATIO 1.  Is there a way to reset the amp to full
power?

73, George K5KG


--
George Wagner, K5KG
Sarasota, FL
[hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]