KPA1500 Manual?

Except I believe that there is more control of when the KPA1500 tuner is
used. It would be nice if the KAT500 could be updated so it is only
activated on bands where it is needed.

John KK9A


Don Wilhelm wrote

Tom,

With only minor exceptions, the KPA1500 should respond in the same way
as the KPA500 combined with the KAT500.

73,
Don W3FPR

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Ken K6MR-3]

Just set the SWR thresholds so that it automatically goes into bypass
below whatever mismatch you consider good enough.

Ken K6MR



------ Original Message ------
From: "[hidden email]" <[hidden email]>
To: [hidden email]
Sent: 29-Nov-17 09:25:43
Subject: [Elecraft] KPA1500 Manual?

>Except I believe that there is more control of when the KPA1500 tuner
>is
>used. It would be nice if the KAT500 could be updated so it is only
>activated on bands where it is needed.
>
>John KK9A
>
>
>Don Wilhelm wrote
>
>Tom,
>
>With only minor exceptions, the KPA1500 should respond in the same way
>as the KPA500 combined with the KAT500.
>
>73,
>Don W3FPR
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]