KPA1500 PF Keys

[Jim Brown-10]

I want to set PF1 and PF2 to set Fan Min Speed to 1 and 5. I can't find
anything in the manual to do that. The only thing I see refers me to the
Programming Reference, which is all "programmers jibberish." :) For
other products, I can program them from the front panel.

73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Jim McCook W6YA]

Jim, I just programmed my PF keys in the KPA1500 for fan speed 0 or 1.

Connect the USB cable to your computer from the KPA1500
Turn on the amp
Open the KPA1500 Utility program
Click on Configuration, then Edit Configuration
Click on the PF Keys tab at top
To set PF1 to fan speed 1 type *^FC1
*To set PF2 to fan speed 5 type *^FC5
*Click OK

Now press/hold PF2.  Fan speed should be 1.  PF2 should ramp up to 5.

The Programming Reference isn't so bad if you scroll down to the
function you want to change.  It's pretty well spelled out.  This
particular function, Minimum Fan Speed, was explained on page 24.

73, Jim
W6YA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Jim McCook W6YA]

The reflector added those asterisks.  Forget them, just use ^FC1 and ^FC5
Jim


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Jim Brown-10]

Thanks Jim.

73, Jim

On 5/24/2020 5:18 PM, Jim McCook wrote:

> The reflector added those asterisks.  Forget them, just use ^FC1 and ^FC5
> Jim
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]