KPA1500 connecting cable to K3

[Elecraft mailing list]

Is there any provision for extending the standard Elecraft cable that is only about 3 ft to accommodate placement of the 1500 a little further away?


6 or 7 ft. would be ideal in my situation.


73,


Art KZ5D
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Art,

The KPA1500 to K3 cable is 5 feet long.
Yes, it can be extended, but about 10 feet is the limit.  The limiting
factor is the response time on the single wire communications bus over
the AUXBUS line.

73,
Don W3FPR

On 6/16/2018 10:24 AM, Art via Elecraft wrote:

> Is there any provision for extending the standard Elecraft cable that is only about 3 ft to accommodate placement of the 1500 a little further away?
>
>
> 6 or 7 ft. would be ideal in my situation.
>
>
> 73,
>
>
> Art KZ5D
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Elecraft mailing list]

 I purchased two aux cables so I could put the amp on a separate side table with my Acom 2000A.  It was interesting that I never got a direct answer on theexact length of a single cable, hi, but the two cables together were a perfect decision.
BillK3WJV

    On Saturday, June 16, 2018, 10:31:43 AM EDT, Art via Elecraft <[hidden email]> wrote:  
 
 Is there any provision for extending the standard Elecraft cable that is only about 3 ft to accommodate placement of the 1500 a little further away?


6 or 7 ft. would be ideal in my situation.


73,


Art KZ5D
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]