KPA1500 fan activation temp.

[Ron Genovesi]

    Does anyone know,  at what temp. The fan should come on (level -1) on the KPA1500?

    Thanks

   
     Ron Genovesi
     [hidden email]





______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[markmusick]

From firmware v1.64 release notes:

. Prior settings: 60, 65, 70, 75, 80 degrees.
. New settings: 60, 70, 78, 85, 90 degrees.

73,
Mark, WB9CIF

-----Original Message-----
From: [hidden email] <[hidden email]> On
Behalf Of Ronald Genovesi
Sent: Wednesday, July 18, 2018 4:00 AM
To: Elecraft Reflector <[hidden email]>
Subject: [Elecraft] KPA1500 fan activation temp.

    Does anyone know,  at what temp. The fan should come on (level -1) on
the KPA1500?

    Thanks

   
     Ron Genovesi
     [hidden email]





______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Paul Baldock]

Listed under new features for 01.64 7-12-2018  is
<ftp://ftp.elecraft.com/KPA1500/Remote Software/KPA1500_Remote
1_0_4_0.exe>Support for Elecraft Remote Software, ver 1.0.4.0.

This suggests that the remote software is now available. However the
link appears not to work. Is the remote software in fact available somewhere?

- Paul  KW7Y
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Eric Swartz - WA6HHQ]

The link will be back soon. We found a few bugs inthe remote sw and temporarily
pulled it from the ftp site.

Stay tuned! We'll announce here when it is back up next week.

Eric
/elecraft.com/

On 7/17/2018 10:00 PM, Paul Baldock wrote:

> Listed under new features for 01.64 7-12-2018  is
> <ftp://ftp.elecraft.com/KPA1500/Remote Software/KPA1500_Remote
> 1_0_4_0.exe>Support for Elecraft Remote Software, ver 1.0.4.0.
>
> This suggests that the remote software is now available. However the link
> appears not to work. Is the remote software in fact available somewhere?
>
> - Paul  KW7Y ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]