Dick,
I agree completely. Perhaps I was not clear. The P3 coupler normally goes -
not between the K3 and the KPA - but between the KPA and the tuner so that
It shows
the "adjusted" SWR as "seen" by the KPA.
The KPA1500 has a tuner built-into the same case.
Jim - W4RKS
----------------------
Original message:
Am not sure why you need a tuner between the radio and the amp in the first
place?? As of now, I have my K3S or K3 driving a Alpha 9500. I never have
used the tuner in either when driving the amp? I assume the KPA9500 will
have a 52 ohm input, and you would not need a tuner.
Dick, K8ZTT
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
