KPA3 D10 Blown. Causes?

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

KPA3 D10 Blown. Causes?

AB3LS
Was running the CQ WPX CW contest here on 20 meters after a normal transmit
cycle, the radio unkeyed and immediately everything was very quiet. All of
the signals dropped in strength by about 7 S Units.

I tried keying up again but this time I wasn't getting any power out and a
high current warning from the radio.

I dropped the power from 100W down to 12W. As soon as the relay kicked to
switch to the LPA, the receive was working fine again. I'm getting the full
~10W out of the LPA.

So... I pulled out the KPA3 and quickly noticed that D10 is blown.

Other than just a normal diode failure, could there be any suspect external
causes for this? I'm not very good at schematics. What is the purpose of
this diode?

73
DE AB3LS
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Geoffrey Wolf
AB3LS
University of Pittsburgh '14
grw20@pitt.edu
liltechdude13@gmail.com
http://www.ab3ls.com