Hi Pete,
That is version "C" KPA3. I commented on that and sent pictures to the
support team a few weeks back.
Yes either they need to go back to the other design or just use an split
washer instead of the inside tooth washer.
I choose to keep the inside tooth washers and just push it work all it was
worth with my finger nail. I got it stuck the first time and had to loosen
the screw to free myself. :-)
The old PA didn't have this problem as the trace was move closer to the edge
of the board.
73 de jay/w5jay..
> Good evening,
> While installing the KPA module in my freshly built K3, I noticed the
> inside tooth washer on one of the mounting screws fastening the PA module
> to the screen comes perilously close to a trace. It is the screw closest
> to a board mounted trimmer, and the trace comes from a to-220 device. Is
> there something I overlooked, or is this a non issue? I didn't see
> anything on a basic search of the archives
> Thanks,
> Pete
> --
> Pete Axson
> W4SEC
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
