KPA3 problem solved!

[ni0c]

Oops!  The problem I reported earlier today
(K3 shutting off when keyed at high power)
was caused by current limiting of my Astron
VS-35M power supply.  Before getting the K3,
I was just using this supply for low power station
accessories and my K2/10, so I had adjusted
the current limiting way down for safety.

Cranking the current limit knob fully clockwise
solved my problem-- the K3 now puts out a full
100 watts to my antenna.

Sorry for the panic! Now to enjoy using my
new K3!

73,
Chuck Guenther NI0C
K2/10 s/n 5853
K3/100 s/n 1061
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com