I experienced a very brief power transient on my house 120 VAC supply. My KAT500 remained powered but my KPA500 dropped off with the fan running. No real concern about either response. What was a surprise was that my setting for Band Change - NORM had reverted to Band Change - STBY. This setting had been changed several days previously and the KPA500 had not been power cycled until the unexpected power transient.
When are changes to KPA500 menu settings saved to NVM? What I observed would be explained if settings are not saved until normal power down. If the settings should be saved at the time they are made I'd like to know why this setting was not remembered.
Thanks and 73,
Andy, k3wyc
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
