KPA500 Firmware loading VERY long
Locked
KPA500 Firmware loading VERY long
 
|
Hi
For now one hour the new KPA500 firmware is loading. It's very loooong.... I get a new line : ex Retry xx successful at address xx every 3 minutes in the KPA500 utility windows... At this speed it will take hours to complete.. Is it normal ? Nicolas, F5HFZ MAC OS 10.8 KPA Utility 1.4.5.4 highest serial speed |
Re: KPA500 Firmware loading VERY long
|
|
Many thanks for the answers but even with another computer (PC) and another cable, I was not able to load the new firmware (and the older too).
I had this message that I send to elecraft support.... Wait and see... Nicolas, F5HFZ Elecraft KPA Utility Version 1.12.3.12 OS Version 6.1 Build 7601 Windows 7/Windows Server 2008 R2 KPA version ??.??. RS-232 speed 38400 bit/s Sending firmware file C:\Users\Nicolas\AppData\Roaming\Elecraft\KPA Firmware\KPA500FP0118.hex to MCU Retry 1 successful at address 0x000800, 68 fill bytes Retry 1 successful at address 0x000940, 68 fill bytes Retry 1 successful at address 0x000980, 68 fill bytes Retry 1 successful at address 0x0009C0, 68 fill bytes Total number of retries was 4 Highest number of retries for any block was 1 Error code 0xE2000048: No response to poll while synchronizing to buffer boundary MCU verification failed. Reload MCU. Click "Close" to close this window |
|
|
For sale: K3/100 SN 3019, with auto tuner, 13k, 6k, 2.8k, 500hz, 200hz
filters. KXV3, KBP3, MH2, KUSB and the KRX3, which is uninstalled, but comes with 13k, 2.7 and 500hz filters. I'm preparing to install the KRX3 (which I bought used off this list from W8CRH), but if someone would like to buy it in it's current form, and install it themselves that is fine as well. I'm going to want about $3300, plus shipping for the rig and KRX3. I'm also selling my KPA500 and might knock a few bucks off a package deal. Here are the details: K3/100, SN 3019 configuration: KAT3 KBPF3 KXV3 MH2 KUSB KFL3A-13K, 8-pole KFL3A-6K, 8-pole KFL3A-2.8K, 8-pole KFL3A-500, 5-pole KFL3A-200, 5-pole KRX3, (not installed in K3): KFL3A-13K, 8-pole KFL3A-2.7K, 5-pole KFL3A-500, 5-pole Thanks and 73, Scott, N9AA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by Nicolas Drin
No.
Chuck, KE9UW Lionel Trains, TCA, LCCA, LRRC aka Jack, BMW Motorcycles BMWMOA #224 ________________________________________ From: [hidden email] [[hidden email]] on behalf of Nicolas Drin [[hidden email]] Sent: Sunday, January 06, 2013 11:01 AM To: [hidden email] Subject: [Elecraft] KPA500 Firmware loading VERY long Hi For now one hour the new KPA500 firmware is loading. It's very loooong.... I get a new line : ex Retry xx successful at address xx every 3 minutes in the KPA500 utility windows... At this speed it will take hours to complete.. Is it normal ? Nicolas, F5HFZ MAC OS 10.8 KPA Utility 1.4.5.4 highest serial speed -- View this message in context: http://elecraft.365791.n2.nabble.com/KPA500-Firmware-loading-VERY-long-tp7568315.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Chuck, KE9UW
|
Re: KPA500 Firmware loading VERY long
|
|
Try restarting your mac. You may also want to check the serial device.
Remove and reload serial device drivers. Looks like communications really aren't working between devices. 73, Bill K9YEQ -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of hawley, charles j jr Sent: Sunday, January 06, 2013 3:46 PM To: Nicolas Drin; [hidden email] Subject: Re: [Elecraft] KPA500 Firmware loading VERY long No. Chuck, KE9UW Lionel Trains, TCA, LCCA, LRRC aka Jack, BMW Motorcycles BMWMOA #224 ________________________________________ From: [hidden email] [[hidden email]] on behalf of Nicolas Drin [[hidden email]] Sent: Sunday, January 06, 2013 11:01 AM To: [hidden email] Subject: [Elecraft] KPA500 Firmware loading VERY long Hi For now one hour the new KPA500 firmware is loading. It's very loooong.... I get a new line : ex Retry xx successful at address xx every 3 minutes in the KPA500 utility windows... At this speed it will take hours to complete.. Is it normal ? Nicolas, F5HFZ MAC OS 10.8 KPA Utility 1.4.5.4 highest serial speed -- View this message in context: http://elecraft.365791.n2.nabble.com/KPA500-Firmware-loading-VERY-long-tp756 8315.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
On Sun, 6 Jan 2013 17:09:19 -0600, Bill K9YEQ wrote:
> Looks like communications really > aren't working between devices. Why is it this list insists on responding to the poster and not the list!!!! EVERY TIME I reply, it goes to a single person and has to be reposted for the group. For the OP, upload to the KPA takes a minute or two. I didn't time it. The progress bar just kept moving, so I was happy. It's not making it if it takes a long time. Did mine last night. Gary -- http://ag0n.net 3055: http://ag0n.net/irlp/3055 NodeOp Help Page: http://ag0n.net/irlp ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Re: KPA500 Firmware loading VERY long
|
|
Perhaps you should click on Reply All
rather than Reply. 73, Ken K3IU ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ On 1/6/2013 6:30 PM, AG0N-3055 wrote: > On Sun, 6 Jan 2013 17:09:19 -0600, Bill K9YEQ wrote: > >> Looks like communications really >> aren't working between devices. > Why is it this list insists on responding to the poster and not the > list!!!! EVERY TIME I reply, it goes to a single person and has to be > reposted for the group. > > For the OP, upload to the KPA takes a minute or two. I didn't time it. > The progress bar just kept moving, so I was happy. It's not making it > if it takes a long time. Did mine last night. > > Gary ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Re: Responding to posts was: KPA500 Firmware loading VERY long
|
|
That would do it.
73 de Ray K2ULR KX3 #211 On Jan 6, 2013, at 6:58 PM, Ken Wagner K3IU wrote: > Perhaps you should click on Reply All rather than Reply. > 73, Ken K3IU > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by Ken Wagner K3IU
On Sun, 06 Jan 2013 18:58:46 -0500, Ken Wagner K3IU wrote:
> Perhaps you should click on Reply All > rather than Reply. In 20 yrs of email, I've never needed to use reply all, and I don't intend to begin now. Gary -- http://ag0n.net 3055: http://ag0n.net/irlp/3055 NodeOp Help Page: http://ag0n.net/irlp ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Gary Sir, it's one of those "stupid" change YAHOO has made when they change to this supposed new look.
(((73))) Milverton. >________________________________ > From: AG0N-3055 <[hidden email]> >To: elecraft <[hidden email]> >Sent: Sunday, January 6, 2013 6:06 PM >Subject: Re: [Elecraft] KPA500 Firmware loading VERY long > >On Sun, 06 Jan 2013 18:58:46 -0500, Ken Wagner K3IU wrote: > >> Perhaps you should click on Reply All >> rather than Reply. > >In 20 yrs of email, I've never needed to use reply all, and I don't >intend to begin now. > >Gary >-- >http://ag0n.net >3055: http://ag0n.net/irlp/3055 >NodeOp Help Page: http://ag0n.net/irlp >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[hidden email] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html > > > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by mcduffie
On Sun, 06 Jan 2013 19:12:31 -0500, Ray Sills wrote:
> I don't expect Eric or Wayne will change the list policy. Apparently not. They haven't answered my question about it last week. Gary -- http://ag0n.net 3055: http://ag0n.net/irlp/3055 NodeOp Help Page: http://ag0n.net/irlp ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by mcduffie
I run T-bird and Firefox. If I do "Reply" on the Elecraft list, it goes
to the poster, not the list. If I right-click on the message and select "Reply to list," it goes to the list. 73, Fred K6DGW - Northern California Contest Club - CU in the 2013 Cal QSO Party 5-6 Oct 2013 - www.cqp.org On 1/6/2013 3:30 PM, AG0N-3055 wrote: > Why is it this list insists on responding to the poster and not the > list!!!! EVERY TIME I reply, it goes to a single person and has to be > reposted for the group. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Re: KPA500 Firmware loading VERY long
|
|
In reply to this post by tnnyswy
This is not a Yahoo! group, it's a mailman list. mailman has options
for Reply-To munging - see: http://www.gnu.org/software/mailman/mailman-admin/node11.html If you think the wrong choice has been made for this list, you probably need to take it up with Eric. 73, ~iain / N6ML On Sun, Jan 6, 2013 at 4:15 PM, <[hidden email]> wrote: > Gary Sir, it's one of those "stupid" change YAHOO has made when they change to this supposed new look. > > > (((73))) Milverton. > > > > > >>________________________________ >> From: AG0N-3055 <[hidden email]> >>To: elecraft <[hidden email]> >>Sent: Sunday, January 6, 2013 6:06 PM >>Subject: Re: [Elecraft] KPA500 Firmware loading VERY long >> >>On Sun, 06 Jan 2013 18:58:46 -0500, Ken Wagner K3IU wrote: >> >>> Perhaps you should click on Reply All >>> rather than Reply. >> >>In 20 yrs of email, I've never needed to use reply all, and I don't >>intend to begin now. >> >>Gary >>-- >>http://ag0n.net >>3055: http://ag0n.net/irlp/3055 >>NodeOp Help Page: http://ag0n.net/irlp >>______________________________________________________________ >>Elecraft mailing list >>Home: http://mailman.qth.net/mailman/listinfo/elecraft >>Help: http://mailman.qth.net/mmfaq.htm >>Post: mailto:[hidden email] >> >>This list hosted by: http://www.qsl.net >>Please help support this email list: http://www.qsl.net/donate.html >> >> >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Hi Iain,
When I see a word whose definition eludes me I usually Google it for a quick Urban Dictionary or Wiki definition. A word of caution, if you don't know what Munging means you are going to want to Google "Data Munging". 73, Mike K2MK
|
|
|
In reply to this post by Nicolas Drin
On Sun, 6 Jan 2013 17:09:19 -0600, Bill K9YEQ wrote:
> Looks like communications really > aren't working between devices. For the OP, upload to the KPA takes a minute or two. I didn't time it. The progress bar just kept moving, so I was happy. It's not making it if it takes a long time. Did mine last night. Gary -- http://ag0n.net 3055: http://ag0n.net/irlp/3055 NodeOp Help Page: http://ag0n.net/irlp ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by Scott Manthe-2
For sale: Excellent K3/100 SN 3019, with auto tuner, 13k, 6k, 2.8k,
500hz, 200hz filters. KXV3, KBP3, MH2, and the KUSB. I'm going to want about $2400, plus shipping for the rig. I also have extra filters for sale: KFL3B-FM, $129.00 shipped and and KFL3A-500 $89 shipped. Here are the details: K3/100, SN 3019 configuration: KAT3 KBPF3 KXV3 MH2 KUSB KFL3B-FM, 8-pole KFL3A-6K, 8-pole KFL3A-2.8K, 8-pole KFL3A-500, 5-pole KFL3A-200, 5-pole Thanks and 73, Scott, N9AA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Good morning Scott, I’m interested. A couple of quick questions: Are you the first owner? Factory or kit built? Approximately how old is the rig? I am going to do a quick check on the Elecraft site so I know exactly what you have on the rig. Have a photo or two? I have learned the hard way to work quickly on these. I have missed a couple by minutes. 73’s Tom Ex WD5DFE From: Scott Manthe-2 [via Elecraft] [mailto:[hidden email]] For sale: Excellent K3/100 SN 3019, with auto tuner, 13k, 6k, 2.8k, If you reply to this email, your message will be added to the discussion below: http://elecraft.365791.n2.nabble.com/KPA500-Firmware-loading-VERY-long-tp7568315p7568414.html To start a new topic under Elecraft, email [hidden email] |
Elecraft K3 for sale-NO LONGER AVAILABLE!
|
|
In reply to this post by Scott Manthe-2
The K3 and filters are no longer available, as I've decided to hang onto
them. Thanks to everyone who inquired about the rig and filters! 73, Scott, N9AA On 1/8/13 11:19 AM, Scott Manthe wrote: > For sale: Excellent K3/100 SN 3019, with auto tuner, 13k, 6k, 2.8k, > 500hz, 200hz filters. KXV3, KBP3, MH2, and the KUSB. I'm going to want > about $2400, plus shipping for the rig. I also have extra filters for > sale: KFL3B-FM, $129.00 shipped and and KFL3A-500 $89 shipped. > > Here are the details: > > K3/100, SN 3019 configuration: > KAT3 > KBPF3 > KXV3 > MH2 > KUSB > KFL3B-FM, 8-pole > KFL3A-6K, 8-pole > KFL3A-2.8K, 8-pole > KFL3A-500, 5-pole > KFL3A-200, 5-pole > > > Thanks and 73, > Scott, N9AA > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |