KPA500 Frequecies

[W4GRJ]

Will the KPA500 work on all freqs outside the HF Ham bands.
I want to make sure it will function on MARS freqs.

Jack
W4GRJ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[N5GE]

Jack,

Yes.

I am tuning an NVIS loop with mine that is fed with coax to a 4:1
balun.  From the balun the antenna is fed with 450 ohm window line.

If the SWR at the tuner is less than 10:1 it will tune 600W into that
antenna.  At 100W it will tune a bit higher SWR.

My amplifier is the KPA500 and the two devices work very well
together.

Tom Childers,
N5GE/NNN0KN

On Mon, 30 Sep 2013 20:49:43 -0400, you wrote:

>Will the KPA500 work on all freqs outside the HF Ham bands.
>I want to make sure it will function on MARS freqs.
>
>Jack
>W4GRJ
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html