KPA500,KAT500 DOES NOT RESPOND TO K3

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

KPA500,KAT500 DOES NOT RESPOND TO K3

Kenneth Hale
Received my new KOA500 AND KAT500 but have not been able to get either one
to respond to the K3.  The K3 was working great as a barefoot radio.  Have
tried to connect the system in about 5 different configurations as shown in
the manuals that came with the amp and tuner. No response from the tuner or
amp.  Could some menu setting in the K3 be stopping the use of the KPA 500
and KAT500?  Very confused at this point.

 

 

 

Ken Hale KE5KNF

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: KPA500,KAT500 DOES NOT RESPOND TO K3

Phil Hystad-3
Are you trying to hook everything up at once for the first time?

If so, I would suggest first getting the KPA500 to work with the K3 without using the KAT500 and once you have done that configure in the KAT500.

I followed the configuration descriptions in hooking up my K-line but I don't remember having to change any configurations (menu stuff) to support the KPA500 or the KAT500.  But then, maybe I have forgotten.

73, phil, K7PEH


On Feb 16, 2013, at 9:17 PM, Kenneth Hale <[hidden email]> wrote:

> Received my new KOA500 AND KAT500 but have not been able to get either one
> to respond to the K3.  The K3 was working great as a barefoot radio.  Have
> tried to connect the system in about 5 different configurations as shown in
> the manuals that came with the amp and tuner. No response from the tuner or
> amp.  Could some menu setting in the K3 be stopping the use of the KPA 500
> and KAT500?  Very confused at this point.
>
>
>
>
>
>
>
> Ken Hale KE5KNF
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: KPA500,KAT500 DOES NOT RESPOND TO K3

Bruce McLaughlin-2
In reply to this post by Kenneth Hale
Could you be more specific as to what is and is not working?  I have a k3
and a KPA 500 but not a KAT 500.  The amplifier works perfectly with my K-3,
using the AUX cable.  I did have a problem at first which was entirely due
to my own stupidity.  The amplifier was factory assembled and I did not
realize that it was shipped without fuses installed.  Consequently when I
first attempted to use it, it was deader than a doornail!  After I finally
remedied that problem everything worked perfectly.  I assume your amplifier
turns on but does not do anything when attached to the k3 but perhaps you
could be a bit more specific about the problem.

Bruce-W8FU

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Kenneth Hale
Sent: Sunday, February 17, 2013 12:18 AM
To: [hidden email]
Subject: [Elecraft] KPA500,KAT500 DOES NOT RESPOND TO K3
Importance: High
Sensitivity: Confidential

Received my new KOA500 AND KAT500 but have not been able to get either one
to respond to the K3.  The K3 was working great as a barefoot radio.  Have
tried to connect the system in about 5 different configurations as shown in
the manuals that came with the amp and tuner. No response from the tuner or
amp.  Could some menu setting in the K3 be stopping the use of the KPA 500
and KAT500?  Very confused at this point.

 

 

 

Ken Hale KE5KNF

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html