[KPA500] KXSER Exchange Cable

[Roy Morris-6]

I am using a USB<--->DB9-M dongle from the computer USB port to a long cable
terminated with a DB9-M.  The long cable is needed to reach my K-Line.  Will
the KXSER (3.5mm to DB-F) Exchange Cable work for me to update KAT500
firmware?  Thanks.  Roy Morris  W4WFB

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Paul Saffren N6HZ]

Hi Roy,

Yes, the KXSER cable will work to update your KAT500.
The KAT500 uses a 3.5mm stereo plug for the serial port.  This is the same style used on the K144XV, KX3, W2 and XG3 products.  

-Paul

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html