Elecraft › [QRO]

KPA500 - LED Alignment

Classic

List

Threaded

5 messages Options

Harry_Yingst

KPA500 - LED Alignment

In many photos of this amp it looks like the LEDs are not lined up (some higher others lower)
I realize this is cosmetic, but it's a distraction from it's otherwise nice appearance.

Is there a way to bet them to perfectly line up and stay that way?

Thank you.

Don Wilhelm-4

Re: KPA500 - LED Alignment

Harry,

Remove the front panel enclosure and tilt the LEDs until they are
aligned to your satisfaction, then put the front panel metalwork back
on. They will stay aligned.

73,
Don W3FPR

On 5/9/2014 2:10 PM, Harry_Yingst wrote:

> In many photos of this amp it looks like the LEDs are not lined up (some
> higher others lower)
> I realize this is cosmetic, but it's a distraction from it's otherwise nice
> appearance.
>
> Is there a way to bet them to perfectly line up and stay that way?
>
>
> Thank you.
>
>
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/KPA500-LED-Alignment-tp7588837.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Harry_Yingst

Re: KPA500 - LED Alignment

Thank you, I have been seriously considering getting this amplifier.

I have been thinking about the alignment of the LEDs and knew it would bug me for them to not be straight.

________________________________
From: Don Wilhelm <[hidden email]>
To: Harry_Yingst <[hidden email]>; [hidden email]
Sent: Friday, May 9, 2014 2:29 PM
Subject: Re: [Elecraft] KPA500 - LED Alignment

Harry,

Remove the front panel enclosure and tilt the LEDs until they are
aligned to your satisfaction, then put the front panel metalwork back
on. They will stay aligned.

73,
Don W3FPR

On 5/9/2014 2:10 PM, Harry_Yingst wrote:

Tighe Kuykendall

Re: KPA500 - LED Alignment

I believe the manual says to use a straight edge or ruler to gently push
against them to align the LEDs. That's what I did and mine are all
fairly well aligned.

Tighe
NK4I

On 5/9/2014 2:34 PM, Harry Yingst wrote:

> ________________________________
> From: Don Wilhelm <[hidden email]>
> To: Harry_Yingst <[hidden email]>; [hidden email]
> Sent: Friday, May 9, 2014 2:29 PM
> Subject: Re: [Elecraft] KPA500 - LED Alignment
>
>
> Harry,
>
> Remove the front panel enclosure and tilt the LEDs until they are
> aligned to your satisfaction, then put the front panel metalwork back
> on. They will stay aligned.
>
> 73,
> Don W3FPR
>

Harry_Yingst

Re: KPA500 - LED Alignment

Thank you

I have still to order the Amp, it was just something I was curious on.

________________________________
From: Tighe Kuykendall <[hidden email]>
To: [hidden email]
Sent: Friday, May 9, 2014 2:49 PM
Subject: Re: [Elecraft] KPA500 - LED Alignment

I believe the manual says to use a straight edge or ruler to gently push
against them to align the LEDs. That's what I did and mine are all
fairly well aligned.

Tighe
NK4I

On 5/9/2014 2:34 PM, Harry Yingst wrote:

>

--
Tighe Kuykendall
NK4I | www.NK4I.com | Follow Me on Twitter: @NK4I
ARRL Life Member, NAQCC #6467
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]