The powered-off K3 loaded down the KEY IN line, placing the KPA500 in
transmit mode. It was drawing bias current, dissipating heat. After a
while, the heat sink temperature rose to the FAN1 threshold and the fan
came on.
As you said, the solution is to turn off the KPA500 (or place it in STBY
mode).
73 de Bob, K6XX
On 5/31/2012 3:20 PM, Bill Hammond wrote:
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html