All
I figured out the problem and the solution.
If you connect to the KPA500 software from another client and you do NOT
provide the password, you are connect in a 'listen only' mode where you
only see what is going on with the amplifier.
Once you have provided the password, then you have full control of the
amplifier from another computer.
The is clearly a PEBCAC issue.
Jack, thanks for getting back to me. I thought you would like to know.
Mike va3mw
On Sun, Jun 11, 2017 at 11:46 AM, Michael Walker <
[hidden email]>
wrote:
> I am having an issue with the KPA500 software.
>
> It works fine on one PC, but when you use it in client/server mode, which
> I do a lot, It randomly fails on the the client PC. I can see what it is
> doing, but no joy for any commands. It has worked at times. it is also
> not a timeout issue.
>
> The network is both devices on the same subnet plugged into the same
> switch with 3ft cables. Other applications like PSTRotatorAZ work fine
> when doing something similar.
>
> The ports and ip addresses are correct. One other ham friend of mine
> reports the same intermittent failure.
>
> Is anyone else using this mode and having similar issues?
>
> Mike va3mw
>
> ps. I would include screen shots, but the small image size restriction
> makes is hard to do.
>
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
