|
|
Just want to be sure I'm understanding the KPA500 documentation and what I've read on the reflector before I start "pin pulling."
I just noticed my M/F "interrupter" 15 pin adapter that came with the Y cable has all 15 pins. My understanding is that I would need to remove pin 10 to use it for the purpose mentioned in the documentation that comes with the Y cable kit.
If I wanted to get around the Pin 11 conflict that occurs when using the Y cable with the PR6, I would need to remove pin 11 from a M/F 15 pin adapter.
If any of the foregoing is wrong, please let me know. Thanks.
73 Paula k9ir
|
Locked
