KPA500 with K3/0 and remote rig

[Elecraft mailing list]

Hi all,


Interested in using the KPA500 via remote. K3/0 manual states that a simple mod to the KPAK3AUX cable is needed.


However, this cable from factory has a molded shell on both ends. Anyone figured out how to access it to make the wiring connection needed?


Thanks.


Art KZ5D
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

['DGB']

That is not needed ... just use Elecraft's host programs for the KPA500
and KAT500. You will be able to turn them on and off and control them
all over the internet. Did it for 3-mos this past winter down in FL. -
worked like a dream.


73 Dwight NS9I


On 5/15/2016 10:43 AM, Art via Elecraft wrote:

> Hi all,
>
>
> Interested in using the KPA500 via remote. K3/0 manual states that a simple mod to the KPAK3AUX cable is needed.
>
>
> However, this cable from factory has a molded shell on both ends. Anyone figured out how to access it to make the wiring connection needed?
>
>
> Thanks.
>
>
> Art KZ5D
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]