KPOD macro help

[Leroy]

I am doing something wrong when it comes to PRESS or HOLD macros.

 

  Does anyone have a macro that PRESS tunes at one power, and HOLD tunes at
higher power?

I can make one button do one or the other, but when I combine to one button
it only one will work.

 

Any way to make the volume increase or decrease with a macro?

 

    Thanks  Leroy AB7CE

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Leroy,

Check to see which Macro is being issued.  If it is always Macros 1
through 8, then check your operation.
Are you "PRESSing" too long?  Normally the term used is TAP.
If your "PRESS" exceeds 1/2 second, that will not activate macros 9 thru 16.

73,
Don W3FPR

On 9/5/2016 12:52 PM, Leroy Marion wrote:

> I am doing something wrong when it comes to PRESS or HOLD macros.
>
>  
>
>    Does anyone have a macro that PRESS tunes at one power, and HOLD tunes at
> higher power?
>
> I can make one button do one or the other, but when I combine to one button
> it only one will work.
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bill-3]

You can build macros to set the audio gain (volume control for you "high
end ops") where you want it. For example:

AG000; (mute)
AG033; (medium gain)

Actual gain numbers selected will vary from one station to another -
depending upon hearing acuity, speakers, station audio system, etc. 000
is the least gain and it goes up from there.

Bill W2BLC K-Line

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]