KRC-2 and 6m

[Jim AB3CV]

How do you get an output for 6m from the KRC-2?

73

jim ab3cv
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Jack Brindle-2]

You probably need to set the K3 to output the right selection to the KRC2. Check the K3 manual for the KRC2 menu entry - in the rev D10 manual it was on page 57.

Essentially, select the KRC2 entry in the K3 configuration menu, then tap the 1 button on the K3. You want it to show BAND6=B6 for it to work properly.

Your next question will be which KRC2 terminal is selected when this is set properly. For the standard (factory default) bandmap it will be the XV1 terminal. Of course you can remap it as you desire with the KRC2 Utility.

73,

Jack Brindle, W6FB

> On Oct 20, 2015, at 7:00 PM, Jim Miller <[hidden email]> wrote:
>
> How do you get an output for 6m from the KRC-2?
>
> 73
>
> jim ab3cv
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]