Seems to be a conflict .. the KRC2 manual sez ground wire between KRC2
p1 and K3 ACC p5 (which makes sense), KRC2 errata say to use K3 ACC p6
(which is DIGOUT0 and doesn't make sense to me). In any case, I've
wired the first way and AUXBUS from KRC2 p6 to K3 ACC p2. I'm getting
ERR PTT and weird behaviour .. almost as if I'm on 1 and 4 rather than
2 and 5 on the ACC connector, but I've checked and rechecked - the
diagram in the manual matches the numbers stamped in the connectors
and everything seems sane there also.
Anyone got any clues before I give up and put the K2 back in the jitney?
de w1rt/john
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
