KRC2 relay boxes used?

[WD6DBM]

Can anyone recommend a relay box to use with a KRC2, that is also small and
lightweight?  I have my K3 plugged into a Top Ten Devices band decoder and relay
box, but I was hoping for something smaller for the KRC2 used with a K2 in the
field.  I only need 3 or 4 outputs. 


Thanks and 73

Eric WD6DBM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Maarten-2]

I use the MFJ-4716, 6 port Remote antenna switch. I believe there is also a
4 port switch. This switch is very easy to connect to the KRC2 and works at
KW level. Each relais can be activated with 12 V volt from the KRC2. You can
make the connection via with RJ45 connector on the back of the MFJ box. It
requires a little reverse engineering to figure out which wire activates
each port.

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html