KRC2

[Robby.VY2SS]

Can anyone tell me if the KRC2 will work with microHAM's 10 port switch and
if so what is involved?

 

-Robby

VY2SS

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Joe Subich, W4TV-4]

Yes.  Simply make the appropriate connections between
the microHAM Ten Switch and the KRC2 "source driver"
outputs.  The KRC2 will provide one output per band
for 160/80/40/30/20/17/15/12/10/6 meters when the
"band data" (parallel) input is used.  Check with
Elecraft support for information abut aux bus or CAT
support.

73,

   ... Joe, W4TV
   

> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of robby robertson
> Sent: Saturday, September 19, 2009 10:33 AM
> To: [hidden email]
> Subject: [Elecraft] KRC2
>
>
> Can anyone tell me if the KRC2 will work with microHAM's 10
> port switch and if so what is involved?
>
>  
>
> -Robby
>
> VY2SS
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html