KRX3 - COR

[Mike Harris-9]

G'day,

Interested in what power level is required to trigger the carrier operated
relay in the KRX3.  Just out of interest I've checked the coupling between
my OB9-5 and the OB5-6 about 2.4 metres above it, booms in-line.

900W into the HF coax, terminated WM-2 on the 6M coax.  worst case 45mW on
21250kHz.

Same test but looking at the pickup on the 40M coax, 5mW.

Regards,

Mike VP8NO

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Bill W4ZV]

Mike Harris-9 wrote

Interested in what power level is required to trigger the carrier operated
relay in the KRX3.

According to Wayne, +20 to +25 dBm activates the COR in both RX ANT (KXV3) and AUX RF (KRX3).

73,  Bill