KRX3 Mod

[w4sc-2]

The mod information is in the KBPF3A installation instructions.  It only required if you have a KBPF3A installed and want to RX VLF (i.e. 630M)

Microsoft Word - E740265 KBPF3A Option Installation Rev A1.doc (elecraft.com)

de Ben W4SC

Sent from Mail for Windows 10

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Dennis Egan]

That answers my question.  The KBPF3 is not being installed into the
sub-receiver,
and the K3S already has the part installed on the main RF board.  So, no
mod is needed.

Thanks!

Dennis W1UE


On Sun, Jun 13, 2021 at 7:26 AM w4sc <[hidden email]> wrote:

> The mod information is in the KBPF3A installation instructions.  It only
> required if you have a KBPF3A installed and want to RX VLF (i.e. 630M)
>
>
>
> Microsoft Word - E740265 KBPF3A Option Installation Rev A1.doc
> (elecraft.com)
> <https://ftp.elecraft.com/K3S/Manuals%20Downloads/E740265%20KBPF3A%20Option%20Installation%20Rev%20A1.pdf>
>
>
>
> de Ben W4SC
>
>
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows 10
>
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]