KRX3 Question

[Grant Youngman]

Question .. Part no. is the same, but just to make sure ...

Is there something new about the KRX3 sub receiver listed with the K3S, or is it the same legacy component I currently have in my K3?

Thanks

Grant NQ5T

Sent from my iPhone
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Joe Subich, W4TV-4]

In particular, since the KRX3 has a single 10 dB attenuator which
switches with the main RX, how does the old KRX3 behave when used
in the K3S which has cascaded 5 and 10 dB attenuators which can be
selected individually (-5, -10 dB) or together (-15 dB)?

73,

    ... Joe, W4TV



On 2015-05-14 6:31 PM, Grant Youngman wrote:

> Question .. Part no. is the same, but just to make sure ...
>
> Is there something new about the KRX3 sub receiver listed with the K3S, or is it the same legacy component I currently have in my K3?
>
> Thanks
>
> Grant NQ5T
>
> Sent from my iPhone
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Phil Wheeler-2]

Perhaps the new synth board some of us have
already installed in a K3?

Phil W7OX

On 5/14/15 3:31 PM, Grant Youngman wrote:
> Question .. Part no. is the same, but just to make sure ...
>
> Is there something new about the KRX3 sub receiver listed with the K3S, or is it the same legacy component I currently have in my K3?
>
> Thanks
>
> Grant NQ5T

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Grant Youngman]

I already have the new synth boards in my K3. Just would like to know if the receiver module itself is the same or if it's also been updated for the K3S.

Grant NQ5T

Sent from my iPhone

> On May 14, 2015, at 6:31 PM, Phil Wheeler <[hidden email]> wrote:
>
> Perhaps the new synth board some of us have already installed in a K3?
>
> Phil W7OX
>
>> On 5/14/15 3:31 PM, Grant Youngman wrote:
>> Question .. Part no. is the same, but just to make sure ...
>>
>> Is there something new about the KRX3 sub receiver listed with the K3S, or is it the same legacy component I currently have in my K3?
>>
>> Thanks
>>
>> Grant

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[wayne burdick]

The only change to the KRX3 is the addition of a noise reduction mod for the 100-500 kHz range. A mod kit will be available for this.

Wayne
N6KR

----
http://www.elecraft.com

> On May 14, 2015, at 7:51 PM, Grant Youngman <[hidden email]> wrote:
>
> I already have the new synth boards in my K3. Just would like to know if the receiver module itself is the same or if it's also been updated for the K3S.
>
> Grant NQ5T
>
> Sent from my iPhone
>
>> On May 14, 2015, at 6:31 PM, Phil Wheeler <[hidden email]> wrote:
>>
>> Perhaps the new synth board some of us have already installed in a K3?
>>
>> Phil W7OX
>>
>>> On 5/14/15 3:31 PM, Grant Youngman wrote:
>>> Question .. Part no. is the same, but just to make sure ...
>>>
>>> Is there something new about the KRX3 sub receiver listed with the K3S, or is it the same legacy component I currently have in my K3?
>>>
>>> Thanks
>>>
>>> Grant
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]