KRX3 and PR6

[S Sacco]

So, if I wanted to get a KRX3 to use for diversity reception using a separate antenna, and specifically, wanted to use it on 6M, it looks to me like I would not be able to interface another PR6 (to go along with the one that I already have on the radio).

True?

73,
Steve NN4X


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[KK7P]

> So, if I wanted to get a KRX3 to use for diversity reception using a
> separate antenna, and specifically, wanted to use it on 6M, it looks to
> me like I would not be able to interface another PR6 (to go along with
> the one that I already have on the radio).

If you need the PR6 on the second antenna, then you could add a PR6 to
the rear panel Aux RF jack that feeds the KRX3.  This means that the
KRX3 would not be wired to use the "unused" antenna position on the
KAT3, if installed.

73,

Lyle KK7P
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html