KRX3 volume disparity solution?

[K2QI]

Has there been any solution found for the volume level disparity between the primary and secondary receivers?  I've always noticed that the audio level from the KRX3 is always slightly less than that coming out of the main receiver.  As a result, I have to increase output from the sub about 20-30% in order to compensate and balance out the combined signal in my headset.

I'm using the latest firmware which is still 3.19 I believe.

73 de James K2QI

[K2QI]

Nevermind.  I really should sleep more.  Preamp was turned off on the subRX.  Duh.

James K2QI

K3JPS wrote

Has there been any solution found for the volume level disparity between the primary and secondary receivers?  I've always noticed that the audio level from the KRX3 is always slightly less than that coming out of the main receiver.  As a result, I have to increase output from the sub about 20-30% in order to compensate and balance out the combined signal in my headset.

I'm using the latest firmware which is still 3.19 I believe.

73 de James K2QI

[Ken Kopp-3]

I have the audio level disparity, but don't consider it a problem.

I use my 2nd receiver to monitor 6M for openings.  It has a simple
1/4 wave vertical on it and the main receiver has a 5el NBS yagi at
75' that's fed with 7/8" pressurized Heliax.  It's dramatic to listen to
the two receivers and the difference in what the two antennas hear!
(:-))

73! Ken Kopp - K0PP
     [hidden email]
     http://tinyurl.com/7lm3m5 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html