KSB2 misbehavior

[Bob Whelan]

Hi

Thanks for the replies to my earlier post - can someone confirm that
when cycling through SSbC from 1-1 to 4-1 what the states of the three
compressor pins COMP0/COMP1/COMP2 are please?

COMP0 seems to be permanently at LO - anyway thanks for the help Looks
like a dead chip!

73 and HNY to all

Bob G3PJT


--
Internal Virus Database is out-of-date.
Checked by AVG Free Edition.
Version: 7.1.361 / Virus Database: 267.14.7/214 - Release Date: 12/23/2005

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Sverre Holm-2]

>
> Thanks for the replies to my earlier post - can someone
> confirm that when cycling through SSbC from 1-1 to 4-1 what
> the states of the three compressor pins COMP0/COMP1/COMP2 are please?

They start all high for SSBC 1-1, then COMP2 goes low, then COMP2 + COMP1,
until all three are low for SSBC 4-1 (max compression).


73

Sverre
LA3ZA
http://www.qslnet.de/la3za/
 


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com