KSYN3 mods to date, corrected third mod applicability

[Paul Kirley]

The most recent mod to the KSYN3 board(s) is the third mod to that board.  The second mod potentially undoes and redoes the first mod (unless you chose to do the first mod via SMD change).

First mod, applicable to all K3s shipped before 12/22/08:
http://www.elecraft.com/K3/mods/ELECRAFT_Application_Note_KSYN3_ALC_Rev_A.pdf

Second mod, applicable to any synthesizer without a metal plate glued to it:
http://www.elecraft.com/manual/ELECRAFT%20KSYN3%20Stiffener%20Mod%20Rev%20D.pdf

Third mod, applicable to S/N prior to 3922:
http://www.elecraft.com/K3/mods/KSYN3%20DDS%20Gain%20Modification.pdf

I have done the first mod, but would have to undo it and redo it if I did the the second mod.  And the third mod would then await.

Fortunately, I have only one KSYN3 board--not having bought a second receiver (which includes a second KSYN3).

73, Paul W8TM

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Bill W4ZV]

If a KSYN3 was completely unmodified, the mods should be done as follows:

1.  SMD version (only) of KSYN3 ALC.
2.  K3SYN DDS Gain (your #3 below).
3.  KSYN3 Stiffener (your #2 below).

This way there's no rework.  Also remember that the DDS Gain mod is not necessary for the Sub RX KSYN3 (if you do not later accidentally swap KSYN3 boards), and the recent Stiffener mod is not necessary if the internal speaker is not used during transmit (e.g. for those who use an external speaker or headphones).

Sorry you must redo your ALC mod with SMD.  I would need to do the same if I needed the Stiffener mod.

73,  Bill

Paul Kirley wrote

The most recent mod to the KSYN3 board(s) is the third mod to that board.  The second mod potentially undoes and redoes the first mod (unless you chose to do the first mod via SMD change).

First mod, applicable to all K3s shipped before 12/22/08:
http://www.elecraft.com/K3/mods/ELECRAFT_Application_Note_KSYN3_ALC_Rev_A.pdf

Second mod, applicable to any synthesizer without a metal plate glued to it:
http://www.elecraft.com/manual/ELECRAFT%20KSYN3%20Stiffener%20Mod%20Rev%20D.pdf

Third mod, applicable to S/N prior to 3922:
http://www.elecraft.com/K3/mods/KSYN3%20DDS%20Gain%20Modification.pdf

I have done the first mod, but would have to undo it and redo it if I did the the second mod.  And the third mod would then await.

Fortunately, I have only one KSYN3 board--not having bought a second receiver (which includes a second KSYN3).

73, Paul W8TM

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[e-mail]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html