KSYN3A Install

[Elecraft mailing list]

The install in two K3s, each with one receiver, went well.

Make sure you connect the cable to the correct port on the ksyn3a.  Don't ask me why.

The K3 is the greatest!

73, Steve, k4fj

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[KENT TRIMBLE]

And also make sure you download and follow the revised instructions and
Errata from the Elecraft website.  Do NOT follow the printed
instructions shipping with the boards (unless they match the website
revisions).

Note also that if you have the 2-meter phase-lock option, the REF OUT
cable is removed from the 2-meter module and not used.

73,

Kent  K9ZTV



On 3/6/2015 6:37 PM, someone wrote:
> Make sure you connect the cable to the correct port on the ksyn3a.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]