Scott,
We talked yesterday about a problem I have with subject kit.
When I did the smoke test(before installing it in the K1)I did get 12
volts on the Digital VOM. I then tried to remove the batteries and
found one batt to be too hot to handle. Out of curiosity I remeasured
the voltage and got 11 volts. When the battery in question cooled
down I removed it and noted it's casing was separated near the bottom
of the batt.
My first thought was that I had installed the diode improperly, thus
my call to you.
There is no rush to get this done. If you like I could remove the
switch, diode and wiring harness and send all to you to examine.
72/73,
John
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
