Hi, Raj.
The link to the Prolific web site for updated drivers for the KUSB is in the
k3 Utility Help Troubleshooting section. Yes, I know that no one ever reads
Help (me included), but as issues have come up I've tried to add a section
that describes the solutions that have been discovered.
Eric asked me again for the link and I suspect he's planning to add a link
from the Elecraft web site. He's a pretty busy guy, though.
Thanks for your note, it's another confirmation that the driver update is
consistently resolving this issue.
I had updated my Prolific driver some months ago and didn't ran into this
issue during development testing. I'll have to find another test machine,
I'm using five now...
73 de Dick, K6KR
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]] On Behalf Of Rajiv Dewan, N2RD
Sent: Sunday, January 13, 2008 10:26 AM
To: Elecraft List
Subject: [Elecraft] KUSB Update
I was having difficulty updating my K3 with the latest version of the
DSP code. On Greg's recommendation I updated the KUSB driver and that
solved my problem.
I could not find the link to KUSB driver on the Elecraft site, but found
them on www.prolific.com.tw. The device is PL-2303. I updated the
driver from 2.0.0.18 to 2.0.2.8 (on WinXP SP2) and it solved the DSP
update problem via KUSB.
Raj, N2RD
K3 #170
K2 #5613
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
