Thanks, Gerald. Apparently the Keyspan uses a TI chipset and I did try
their latest drivers. BTW, I have a K3 (connected via P3) on the serial
cable.
Barry K6RM
On Sat, Sep 22, 2012 at 10:47 AM, Gerald Manthey <
[hidden email]> wrote:
> I had the damnest time getting my K2 and usb converter to work. Check all
> params baud rates, com port #'s and nothing. Blue screen of death is
> usually caused by a wrong chip set. Update drivers make sure you are using
> FTDI chip set. This is my advise, but more info needed such as rig, brand
> converter, etc.
> Don W3FPR is very knowledgeable on this.
> Hope it helps
> 73's Gerald
> On Sep 22, 2012 9:41 AM, "Barry Pfeil" <
[hidden email]> wrote:
>
>> Does anyone have experience with the subject combination? I just tried
>> using a newly-purchased version of my trusty old Keyspan USA-19HS and it
>> crashes Windows 7 (blue screen) when I try to TX with F1. Worked fine
>> with
>> XP. I'll order KUSB if I get OK reports here. TIA!
>> 73, Barry, K6RM
>> ______________________________________________________________
>> Elecraft mailing list
>> Home:
http://mailman.qth.net/mailman/listinfo/elecraft>> Help:
http://mailman.qth.net/mmfaq.htm>> Post: mailto:
[hidden email]
>>
>> This list hosted by:
http://www.qsl.net>> Please help support this email list:
http://www.qsl.net/donate.html>>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
