I recently completed the subject KX1. The process was typically Elecraft;
all parts were present, instructions clear and everything worked.
One question for the group regarding power output. I get 2.9 watts on 20 and
3.4 watts on 40 with a supply voltage of 13.5. Are these powers low enough
to warrant digging into the toroids (L1, L2, L3, T1)?
I am interested in the experiences of others who have been there.
(I measured the power into the Elecraft dummy load with a Fluke 189 and used
the correct formula, not the one on the dummy load instruction sheet.)
Ed Lambert, KD3Y
K2-1999; KX1-1492
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
